Product > Block & rail-EG series > EGW35CC/EGW35SC


Color: Silver
Material: Bearing Steel
Brand name: Inpro
Types: EGH and EGW

1. Applied in semiconductor manufacturing equipment, printed circuit boards, IC assembly equipment, medical equipment, robotic arms, precision measurement machine and other small linear motion device.
2. Made of Bearing Steel with low friction coefficients
3.The system works beautifully for both slider motion as well as panning
4.It worked great and had no resistance in the bearings when put on a rail


1-3 EG Series - Low Profile Ball Type Linear Guideway

1-3-1 Structure


Rolling circulation system: Block, rail, end cap and retainer

Lubrication system: Grease nipple and piping Joint

Dust protection system: End seal, bottom seal, cap and scraper


1-3-2 Standard and Maximum Lengths of Rail

INPRO offers a number of  standard rail lengths. Standard rail lengths feature  end mounting hole placements set to predetermined values (E). For non-standard rail lengths, be sure to specify the E-value to be no greater than 1/2 the pitch (P) dimension. An E-value greater than this will result in unstable rail ends.


L =(n-1)  xP + 2  x  E     ···············    Eq.2.2

L : Total length of rail (mm)

n : Number of mounting holes

P : Distance between any two holes (mm)

E : Distance from the center of the last hole to the edge (mm)


Contact Information:
Andrew Chan

Cell: 0086-180 6833 2257

Previous: MGN7C/MGN7H